[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Commits] r18335 - in /fsf/trunk/libc: ./ elf/ libio/bits/ malloc/ manual/ nptl/ nptl/sysdeps/sparc/sparc32/ nptl/sysdeps/sparc/sparc3...
- To: commits@xxxxxxxxxx
- Subject: [Commits] r18335 - in /fsf/trunk/libc: ./ elf/ libio/bits/ malloc/ manual/ nptl/ nptl/sysdeps/sparc/sparc32/ nptl/sysdeps/sparc/sparc3...
- From: eglibc@xxxxxxxxxx
- Date: Fri, 04 May 2012 00:01:38 -0000
Author: eglibc
Date: Fri May 4 00:01:37 2012
New Revision: 18335
Log:
Import glibc-mainline for 2012-05-04
Added:
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/pthread_spin_lock.S
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/pthread_spin_trylock.S
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/sparcv9/pthread_spin_init.c
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/sparcv9/pthread_spin_lock.S
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/sparcv9/pthread_spin_trylock.S
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/sparcv9/pthread_spin_unlock.S
fsf/trunk/libc/nptl/sysdeps/sparc/sparc64/pthread_spin_init.c
fsf/trunk/libc/nptl/sysdeps/sparc/sparc64/pthread_spin_lock.S
fsf/trunk/libc/nptl/sysdeps/sparc/sparc64/pthread_spin_trylock.S
fsf/trunk/libc/nptl/sysdeps/sparc/sparc64/pthread_spin_unlock.S
Removed:
fsf/trunk/libc/FAQ
fsf/trunk/libc/FAQ.in
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/pthread_spin_lock.c
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/pthread_spin_trylock.c
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/sparcv9/pthread_spin_lock.c
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/sparcv9/pthread_spin_trylock.c
fsf/trunk/libc/nptl/sysdeps/sparc/sparc32/sparcv9/pthread_spin_unlock.c
fsf/trunk/libc/nptl/sysdeps/sparc/sparc64/pthread_spin_lock.c
fsf/trunk/libc/nptl/sysdeps/sparc/sparc64/pthread_spin_trylock.c
fsf/trunk/libc/nptl/sysdeps/sparc/sparc64/pthread_spin_unlock.c
fsf/trunk/libc/scripts/gen-FAQ.pl
Modified:
fsf/trunk/libc/ChangeLog
fsf/trunk/libc/Makefile
fsf/trunk/libc/Makerules
fsf/trunk/libc/NEWS
fsf/trunk/libc/elf/Makefile
fsf/trunk/libc/libio/bits/stdio-ldbl.h
fsf/trunk/libc/libio/bits/stdio2.h
fsf/trunk/libc/malloc/mcheck.c
fsf/trunk/libc/manual/install.texi
fsf/trunk/libc/nptl/ChangeLog
fsf/trunk/libc/nptl/Makefile
fsf/trunk/libc/stdlib/Makefile
fsf/trunk/libc/sysdeps/i386/fpu/libm-test-ulps
Modified: fsf/trunk/libc/ChangeLog
==============================================================================
--- fsf/trunk/libc/ChangeLog (original)
+++ fsf/trunk/libc/ChangeLog Fri May 4 00:01:37 2012
@@ -1,3 +1,76 @@
+2012-05-03 Andreas Jaeger <aj@xxxxxxx>
+
+ * malloc/mcheck.c (mcheck): Add barrier so that malloc/free pair
+ does not get optimized out.
+ (malloc_opt_barrier): New.
+
+2012-05-03 Andreas Jaeger <aj@xxxxxxx>
+ Roland McGrath <roland@xxxxxxxxxxxxx>
+
+ * Makerules (.PRECIOUS): Add %.symlist pattern to prevent
+ intermediate file deletion.
+ (generated): Add .symlist files.
+
+2012-05-03 Joseph Myers <joseph@xxxxxxxxxxxxxxxx>
+
+ [BZ #13775]
+ * libio/bits/stdio-ldbl.h [__USE_XOPEN2K8] (__dprintf_chk):
+ Redirect under this condition.
+ [__USE_XOPEN2K8] (__vdprintf_chk): Likewise.
+ [__USE_GNU] (__dprintf_chk): Not under this condition.
+ [__USE_GNU] (__vdprintf_chk): Likewise.
+ * libio/bits/stdio2.h [__USE_XOPEN2K8] (__dprintf_chk): Declare
+ under this condition.
+ [__USE_XOPEN2K8] (__vdprintf_chk): Likewise.
+ [__USE_XOPEN2K8] (dprintf): Define under this condition.
+ [__USE_XOPEN2K8] (vdprintf): Likewise.
+ [__USE_GNU] (__dprintf_chk): Not under this condition.
+ [__USE_GNU] (__vdprintf_chk): Likewise.
+ [__USE_GNU] (dprintf): Likewise.
+ [__USE_GNU] (vdprintf): Likewise.
+
+2012-05-03 Roland McGrath <roland@xxxxxxxxxxxxx>
+
+ * elf/Makefile (common-generated): Set this instead of generated for
+ .dyn, .phdr, .jmprel files. Remove $(common-objpfx) from the
+ $(all-built-dso)-derived lists.
+
+2012-05-03 Andreas Jaeger <aj@xxxxxxx>
+
+ * sysdeps/i386/fpu/libm-test-ulps: Update.
+
+ * FAQ: Removed.
+ * FAQ.in: Likewise.
+ * scripts/gen-FAQ.pl: Likewise.
+ * manual/install.texi (Installation): Point to online location of
+ FAQ.
+ * Makefile (files-for-dist): Remove FAQ.
+ (FAQ): Remove.
+
+2012-05-02 Allan McRae <allan@xxxxxxxxxxxxx>
+
+ * elf/Makefile: (LDFLAGS-nodel2mod3.so: Use $(no-as-needed).
+ (LDFLAGS-reldepmod5.so): Likewise.
+ (LDFLAGS-reldep6mod1.so): Likewise.
+ (LDFLAGS-reldep6mod4.so): Likewise.
+ (LDFLAGS-reldep8mod3.so): Likewise.
+ (LDFLAGS-unload4mod1.so): Likewise.
+ (LDFLAGS-unload4mod2.so): Likewise.
+ (LDFLAGS-tst-initorder): Likewise.
+ (LDFLAGS-tst-initordera2.so): Likewise.
+ (LDFLAGS-tst-initordera3.so): Likewise.
+ (LDFLAGS-tst-initordera4.so): Likewise.
+ (LDFLAGS-tst-initorderb2.so): Likewise.
+ (LDFLAGS-noload): Likewise.
+ (LDFLAGS-next): Likewise.
+ (LDFLAGS-order2mod1.so): Likewise.
+ (LDFLAGS-order2mod2.so): Likewise.
+ (LDFLAGS-tst-initorder2): Likewise.
+ (LDFLAGS-tst-initorder2a.so): Likewise.
+ (LDFLAGS-tst-initorder2b.so): Likewise.
+ (LDFLAGS-tst-initorder2c.so): Likewise.
+ * stdlib/Makefile: (LDFLAGS-tst-putenv): Likewise.
+
2012-05-02 David S. Miller <davem@xxxxxxxxxxxxx>
* sysdeps/sparc/fpu/libm-test-ulps: Update.
Removed: fsf/trunk/libc/FAQ
==============================================================================
--- fsf/trunk/libc/FAQ (original)
+++ fsf/trunk/libc/FAQ (removed)
@@ -1,1976 +1,0 @@
- Frequently Asked Questions about the GNU C Library
-
-This document tries to answer questions a user might have when installing
-and using glibc. Please make sure you read this before sending questions or
-bug reports to the maintainers.
-
-The GNU C library is very complex. The installation process has not been
-completely automated; there are too many variables. You can do substantial
-damage to your system by installing the library incorrectly. Make sure you
-understand what you are undertaking before you begin.
-
-If you have any questions you think should be answered in this document,
-please let me know.
-
- --drepper@xxxxxxxxxx
-
-~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
-
-1. Compiling glibc
-
-1.1. What systems does the GNU C Library run on?
-1.2. What compiler do I need to build GNU libc?
-1.3. When I try to compile glibc I get only error messages.
- What's wrong?
-1.4. Do I need a special linker or assembler?
-1.5. Which compiler should I use for powerpc?
-1.6. Which tools should I use for ARM?
-1.7. Do I need some more things to compile the GNU C Library?
-1.8. What version of the Linux kernel headers should be used?
-1.9. The compiler hangs while building iconvdata modules. What's
- wrong?
-1.10. When I run `nm -u libc.so' on the produced library I still
- find unresolved symbols. Can this be ok?
-1.11. What are these `add-ons'?
-1.12. My XXX kernel emulates a floating-point coprocessor for me.
- Should I enable --with-fp?
-1.13. When compiling GNU libc I get lots of errors saying functions
- in glibc are duplicated in libgcc.
-1.14. Why do I get messages about missing thread functions when I use
- librt? I don't even use threads.
-1.15. What's the problem with configure --enable-omitfp?
-1.16. I get failures during `make check'. What should I do?
-1.17. What is symbol versioning good for? Do I need it?
-1.18. How can I compile on my fast ix86 machine a working libc for my slow
- i386? After installing libc, programs abort with "Illegal
- Instruction".
-1.19. `make' complains about a missing dlfcn/libdl.so when building
- malloc/libmemprof.so. How can I fix this?
-1.20. Which tools should I use for MIPS?
-1.21. Which compiler should I use for powerpc64?
-1.22. `make' fails when running rpcgen the first time,
- what is going on? How do I fix this?
-1.23. Why do I get:
- `#error "glibc cannot be compiled without optimization"',
- when trying to compile GNU libc with GNU CC?
-
-2. Installation and configuration issues
-
-2.1. Can I replace the libc on my Linux system with GNU libc?
-2.2. How do I configure GNU libc so that the essential libraries
- like libc.so go into /lib and the other into /usr/lib?
-2.3. How should I avoid damaging my system when I install GNU libc?
-2.4. Do I need to use GNU CC to compile programs that will use the
- GNU C Library?
-2.5. When linking with the new libc I get unresolved symbols
- `crypt' and `setkey'. Why aren't these functions in the
- libc anymore?
-2.6. When I use GNU libc on my Linux system by linking against
- the libc.so which comes with glibc all I get is a core dump.
-2.7. Looking through the shared libc file I haven't found the
- functions `stat', `lstat', `fstat', and `mknod' and while
- linking on my Linux system I get error messages. How is
- this supposed to work?
-2.8. When I run an executable on one system which I compiled on
- another, I get dynamic linker errors. Both systems have the same
- version of glibc installed. What's wrong?
-2.9. How can I compile gcc 2.7.2.1 from the gcc source code using
- glibc 2.x?
-2.10. The `gencat' utility cannot process the catalog sources which
- were used on my Linux libc5 based system. Why?
-2.11. Programs using libc have their messages translated, but other
- behavior is not localized (e.g. collating order); why?
-2.12. I have set up /etc/nis.conf, and the Linux libc 5 with NYS
- works great. But the glibc NIS+ doesn't seem to work.
-2.13. I have killed ypbind to stop using NIS, but glibc
- continues using NIS.
-2.14. Under Linux/Alpha, I always get "do_ypcall: clnt_call:
- RPC: Unable to receive; errno = Connection refused" when using NIS.
-2.15. After installing glibc name resolving doesn't work properly.
-2.16. How do I create the databases for NSS?
-2.17. I have /usr/include/net and /usr/include/scsi as symlinks
- into my Linux source tree. Is that wrong?
-2.18. Programs like `logname', `top', `uptime' `users', `w' and
- `who', show incorrect information about the (number of)
- users on my system. Why?
-2.19. After upgrading to glibc 2.1 with symbol versioning I get
- errors about undefined symbols. What went wrong?
-2.20. When I start the program XXX after upgrading the library
- I get
- XXX: Symbol `_sys_errlist' has different size in shared
- object, consider re-linking
- Why? What should I do?
-2.21. What do I need for C++ development?
-2.22. Even statically linked programs need some shared libraries
- which is not acceptable for me. What can I do?
-2.23. I just upgraded my Linux system to glibc and now I get
- errors whenever I try to link any program.
-2.24. When I use nscd the machine freezes.
-2.25. I need lots of open files. What do I have to do?
-2.26. How do I get the same behavior on parsing /etc/passwd and
- /etc/group as I have with libc5 ?
-2.27. What needs to be recompiled when upgrading from glibc 2.0 to glibc
- 2.1?
-2.28. Why is extracting files via tar so slow?
-2.29. Compiling programs I get parse errors in libio.h (e.g. "parse error
- before `_IO_seekoff'"). How should I fix this?
-2.30. After upgrading to glibc 2.1, libraries that were compiled against
- glibc 2.0.x don't work anymore.
-2.31. What happened to the Berkeley DB libraries? Can I still use db
- in /etc/nsswitch.conf?
-2.32. What has do be done when upgrading to glibc 2.2?
-2.33. The makefiles want to do a CVS commit.
-2.34. When compiling C++ programs, I get a compilation error in streambuf.h.
-2.35. When recompiling GCC, I get compilation errors in libio.
-2.36. Why shall glibc never get installed on GNU/Linux systems in
-/usr/local?
-2.37. When recompiling GCC, I get compilation errors in libstdc++.
-
-3. Source and binary incompatibilities, and what to do about them
-
-3.1. I expect GNU libc to be 100% source code compatible with
- the old Linux based GNU libc. Why isn't it like this?
-3.2. Why does getlogin() always return NULL on my Linux box?
-3.3. Where are the DST_* constants found in <sys/time.h> on many
- systems?
-3.4. The prototypes for `connect', `accept', `getsockopt',
- `setsockopt', `getsockname', `getpeername', `send',
- `sendto', and `recvfrom' are different in GNU libc from
- any other system I saw. This is a bug, isn't it?
-3.5. On Linux I've got problems with the declarations in Linux
- kernel headers.
-3.6. I don't include any kernel headers myself but the compiler
- still complains about redeclarations of types in the kernel
- headers.
-3.7. Why don't signals interrupt system calls anymore?
-3.8. I've got errors compiling code that uses certain string
- functions. Why?
-3.9. I get compiler messages "Initializer element not constant" with
- stdin/stdout/stderr. Why?
-3.10. I can't compile with gcc -traditional (or
- -traditional-cpp). Why?
-3.11. I get some errors with `gcc -ansi'. Isn't glibc ANSI compatible?
-3.12. I can't access some functions anymore. nm shows that they do
- exist but linking fails nevertheless.
-3.13. When using the db-2 library which comes with glibc is used in
- the Perl db modules the testsuite is not passed. This did not
- happen with db-1, gdbm, or ndbm.
-3.14. The pow() inline function I get when including <math.h> is broken.
- I get segmentation faults when I run the program.
-3.15. The sys/sem.h file lacks the definition of `union semun'.
-3.16. Why has <netinet/ip_fw.h> disappeared?
-3.17. I get floods of warnings when I use -Wconversion and include
- <string.h> or <math.h>.
-3.18. After upgrading to glibc 2.1, I receive errors about
- unresolved symbols, like `_dl_initial_searchlist' and can not
- execute any binaries. What went wrong?
-3.19. bonnie reports that char i/o with glibc 2 is much slower than with
- libc5. What can be done?
-3.20. Programs compiled with glibc 2.1 can't read db files made with glibc
- 2.0. What has changed that programs like rpm break?
-3.21. Autoconf's AC_CHECK_FUNC macro reports that a function exists, but
- when I try to use it, it always returns -1 and sets errno to ENOSYS.
-3.22. My program segfaults when I call fclose() on the FILE* returned
- from setmntent(). Is this a glibc bug?
-3.23. I get "undefined reference to `atexit'"
-
-4. Miscellaneous
-
-4.1. After I changed configure.in I get `Autoconf version X.Y.
- or higher is required for this script'. What can I do?
-4.2. When I try to compile code which uses IPv6 headers and
- definitions on my Linux 2.x.y system I am in trouble.
- Nothing seems to work.
-4.3. When I set the timezone by setting the TZ environment variable
- to EST5EDT things go wrong since glibc computes the wrong time
- from this information.
-4.4. What other sources of documentation about glibc are available?
-4.5. The timezone string for Sydney/Australia is wrong since even when
- daylight saving time is in effect the timezone string is EST.
-4.6. I've build make 3.77 against glibc 2.1 and now make gets
- segmentation faults.
-4.7. Why do so many programs using math functions fail on my AlphaStation?
-4.8. The conversion table for character set XX does not match with
-what I expect.
-4.9. How can I find out which version of glibc I am using in the moment?
-4.10. Context switching with setcontext() does not work from within
- signal handlers.
-
-
-~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
-
-1. Compiling glibc
-
-1.1. What systems does the GNU C Library run on?
-
-{UD} This is difficult to answer. The file `README' lists the architectures
-GNU libc was known to run on *at some time*. This does not mean that it
-still can be compiled and run on them now.
-
-The systems glibc is known to work on as of this release, and most probably
-in the future, are:
-
- *-*-gnu GNU Hurd
- i[3456]86-*-linux-gnu Linux-2.x on Intel
- m68k-*-linux-gnu Linux-2.x on Motorola 680x0
- alpha*-*-linux-gnu Linux-2.x on DEC Alpha
- powerpc-*-linux-gnu Linux and MkLinux on PowerPC systems
- powerpc64-*-linux-gnu Linux-2.4+ on 64-bit PowerPC systems
- sparc-*-linux-gnu Linux-2.x on SPARC
- sparc64-*-linux-gnu Linux-2.x on UltraSPARC
- arm-*-none ARM standalone systems
- arm-*-linux Linux-2.x on ARM
- arm-*-linuxaout Linux-2.x on ARM using a.out binaries
- mips*-*-linux-gnu Linux-2.x on MIPS
- ia64-*-linux-gnu Linux-2.x on ia64
- s390-*-linux-gnu Linux-2.x on IBM S/390
- s390x-*-linux-gnu Linux-2.x on IBM S/390 64-bit
- cris-*-linux-gnu Linux-2.4+ on CRIS
-
-Ports to other Linux platforms are in development, and may in fact work
-already, but no one has sent us success reports for them. Currently no
-ports to other operating systems are underway, although a few people have
-expressed interest.
-
-If you have a system not listed above (or in the `README' file) and you are
-really interested in porting it, see the GNU C Library web pages to learn
-how to start contributing:
-
- http://www.gnu.org/software/libc/resources.html
-
-
-1.2. What compiler do I need to build GNU libc?
-
-{UD} You must use GNU CC to compile GNU libc. A lot of extensions of GNU CC
-are used to increase portability and speed.
-
-GNU CC is found, like all other GNU packages, on
-
- ftp://ftp.gnu.org/pub/gnu
-
-and the many mirror sites. ftp.gnu.org is always overloaded, so try to find
-a local mirror first.
-
-You should always try to use the latest official release. Older versions
-may not have all the features GNU libc requires. The current releases of
-gcc (3.2 or newer) should work with the GNU C library (for MIPS see question 1.20).
-
-Please note that gcc 2.95 and 2.95.x cannot compile glibc on Alpha due to
-problems in the complex float support.
-
-
-1.3. When I try to compile glibc I get only error messages.
- What's wrong?
-
-{UD} You definitely need GNU make to build GNU libc. No other make
-program has the needed functionality.
-
-We recommend version GNU make version 3.79 or newer. Older versions have
-bugs and/or are missing features.
-
-
-1.4. Do I need a special linker or assembler?
-
-{ZW} If you want a shared library, you need a linker and assembler that
-understand all the features of ELF, including weak and versioned symbols.
-The static library can be compiled with less featureful tools, but lacks key
-features such as NSS.
-
-For Linux or Hurd, you want binutils 2.13 or higher. These are the only
-versions we've tested and found reliable. Other versions may work but we
-don't recommend them, especially not when C++ is involved.
-
-Other operating systems may come with system tools that have all the
-necessary features, but this is moot because glibc hasn't been ported to
-them.
-
-
-1.5. Which compiler should I use for powerpc?
-
-{} Removed. Does not apply anymore.
-
-
-1.6. Which tools should I use for ARM?
-
-{} Removed. Does not apply anymore.
-
-
-1.7. Do I need some more things to compile the GNU C Library?
-
-{UD} Yes, there are some more :-).
-
-* GNU gettext. This package contains the tools needed to construct
- `message catalog' files containing translated versions of system
- messages. See ftp://ftp.gnu.org/pub/gnu or better any mirror
- site. (We distribute compiled message catalogs, but they may not be
- updated in patches.)
-
-* Some files are built with special tools. E.g., files ending in .gperf
- need a `gperf' program. The GNU version (now available in a separate
- package, formerly only as part of libg++) is known to work while some
- vendor versions do not.
-
- You should not need these tools unless you change the source files.
-
-* Perl 5 is needed if you wish to test an installation of GNU libc
- as the primary C library.
-
-* When compiling for Linux, the header files of the Linux kernel must
- be available to the compiler as <linux/*.h> and <asm/*.h>.
-
-* lots of disk space (~400MB for i?86-linux; more for RISC platforms).
-
-* plenty of time. Compiling just the shared and static libraries for
- 35mins on a 2xPIII@550Mhz w/ 512MB RAM. On a 2xUltraSPARC-II@360Mhz
- w/ 1GB RAM it takes about 14 minutes. Multiply this by 1.5 or 2.0
- if you build profiling and/or the highly optimized version as well.
- For Hurd systems times are much higher.
-
- You should avoid compiling in a NFS mounted filesystem. This is
- very slow.
-
- James Troup <J.J.Troup@xxxxxxxxxxxxxxx> reports a compile time for
- an earlier (and smaller!) version of glibc of 45h34m for a full build
- (shared, static, and profiled) on Atari Falcon (Motorola 68030 @ 16 Mhz,
- 14 Mb memory) and Jan Barte <yann@xxxxxxxxxxxxxxxxxxxxxx> reports
- 22h48m on Atari TT030 (Motorola 68030 @ 32 Mhz, 34 Mb memory)
-
- A full build of the PowerPC library took 1h on a PowerPC 750@400Mhz w/
- 64MB of RAM, and about 9h on a 601@60Mhz w/ 72Mb.
-
-
-1.8. What version of the Linux kernel headers should be used?
-
-{AJ,UD} The headers from the most recent Linux kernel should be used. The
-headers used while compiling the GNU C library and the kernel binary used
-when using the library do not need to match. The GNU C library runs without
-problems on kernels that are older than the kernel headers used. The other
-way round (compiling the GNU C library with old kernel headers and running
-on a recent kernel) does not necessarily work. For example you can't use
-new kernel features if you used old kernel headers to compile the GNU C
-library.
-
-{ZW} Even if you are using a 2.0 kernel on your machine, we recommend you
-compile GNU libc with 2.2 kernel headers. That way you won't have to
-recompile libc if you ever upgrade to kernel 2.2. To tell libc which
-headers to use, give configure the --with-headers switch
-(e.g. --with-headers=/usr/src/linux-2.2.0/include).
-
-Note that you must configure the 2.2 kernel if you do this, otherwise libc
-will be unable to find <linux/version.h>. Just change the current directory
-to the root of the 2.2 tree and do `make include/linux/version.h'.
-
-
-1.9. The compiler hangs while building iconvdata modules. What's
- wrong?
-
-{} Removed. Does not apply anymore.
-
-
-1.10. When I run `nm -u libc.so' on the produced library I still
- find unresolved symbols. Can this be ok?
-
-{UD} Yes, this is ok. There can be several kinds of unresolved symbols:
-
-* magic symbols automatically generated by the linker. These have names
- like __start_* and __stop_*
-
-* symbols starting with _dl_* come from the dynamic linker
-
-* weak symbols, which need not be resolved at all (fabs for example)
-
-Generally, you should make sure you find a real program which produces
-errors while linking before deciding there is a problem.
-
-
-1.11. What are these `add-ons'?
-
-{UD} To avoid complications with export rules or external source code some
-optional parts of the libc are distributed as separate packages, e.g., the
-linuxthreads package.
-
-To use these packages as part of GNU libc, just unpack the tarfiles in the
-libc source directory and tell the configuration script about them using the
---enable-add-ons option. If you give just --enable-add-ons configure tries
-to find all the add-on packages in your source tree. This may not work. If
-it doesn't, or if you want to select only a subset of the add-ons, give a
-comma-separated list of the add-ons to enable:
-
- configure --enable-add-ons=linuxthreads
-
-for example.
-
-Add-ons can add features (including entirely new shared libraries), override
-files, provide support for additional architectures, and just about anything
-else. The existing makefiles do most of the work; only some few stub rules
-must be written to get everything running.
-
-Most add-ons are tightly coupled to a specific GNU libc version. Please
-check that the add-ons work with the GNU libc. For example the linuxthreads
-add-on has the same numbering scheme as the libc and will in general only
-work with the corresponding libc.
-
-{AJ} With glibc 2.2 the crypt add-on and with glibc 2.1 the localedata
-add-on have been integrated into the normal glibc distribution, crypt and
-localedata are therefore not anymore add-ons.
-
-
-1.12. My XXX kernel emulates a floating-point coprocessor for me.
- Should I enable --with-fp?
-
-{ZW} An emulated FPU is just as good as a real one, as far as the C library
-is concerned. You only need to say --without-fp if your machine has no way
-to execute floating-point instructions.
-
-People who are interested in squeezing the last drop of performance
-out of their machine may wish to avoid the trap overhead, but this is
-far more trouble than it's worth: you then have to compile
-*everything* this way, including the compiler's internal libraries
-(libgcc.a for GNU C), because the calling conventions change.
-
-
-1.13. When compiling GNU libc I get lots of errors saying functions
- in glibc are duplicated in libgcc.
-
-{EY} This is *exactly* the same problem that I was having. The problem was
-due to the fact that configure didn't correctly detect that the linker flag
---no-whole-archive was supported in my linker. In my case it was because I
-had run ./configure with bogus CFLAGS, and the test failed.
-
-One thing that is particularly annoying about this problem is that once this
-is misdetected, running configure again won't fix it unless you first delete
-config.cache.
-
-{UD} Starting with glibc-2.0.3 there should be a better test to avoid some
-problems of this kind. The setting of CFLAGS is checked at the very
-beginning and if it is not usable `configure' will bark.
-
-
-1.14. Why do I get messages about missing thread functions when I use
- librt? I don't even use threads.
-
-{UD} In this case you probably mixed up your installation. librt uses
-threads internally and has implicit references to the thread library.
-Normally these references are satisfied automatically but if the thread
-library is not in the expected place you must tell the linker where it is.
-When using GNU ld it works like this:
-
- gcc -o foo foo.c -Wl,-rpath-link=/some/other/dir -lrt
-
-The `/some/other/dir' should contain the thread library. `ld' will use the
-given path to find the implicitly referenced library while not disturbing
-any other link path.
-
-
-1.15. What's the problem with configure --enable-omitfp?
-
-{} Removed. Does not apply anymore.
-
-
-1.16. I get failures during `make check'. What should I do?
-
-{AJ} The testsuite should compile and run cleanly on your system; every
-failure should be looked into. Depending on the failures, you probably
-should not install the library at all.
-
-You should consider reporting it in bugzilla
-<http://sourceware.org/bugzilla/> providing as much detail as possible.
-If you run a test directly, please remember to set up the environment
-correctly. You want to test the compiled library - and not your installed
-one. The best way is to copy the exact command line which failed and run
-the test from the subdirectory for this test in the sources.
-
-There are some failures which are not directly related to the GNU libc:
-- Some compilers produce buggy code. No compiler gets single precision
- complex numbers correct on Alpha. Otherwise, gcc-3.2 should be ok.
-- The kernel might have bugs. For example on Linux/Alpha 2.0.34 the
- floating point handling has quite a number of bugs and therefore most of
- the test cases in the math subdirectory will fail. Linux 2.2 has
- fixes for the floating point support on Alpha. The Linux/SPARC kernel has
- also some bugs in the FPU emulation code (as of Linux 2.2.0).
-- Other tools might have problems. For example bash 2.03 gives a
- segmentation fault running the tst-rpmatch.sh test script.
-
-
-1.17. What is symbol versioning good for? Do I need it?
-
-{AJ} Symbol versioning solves problems that are related to interface
-changes. One version of an interface might have been introduced in a
-previous version of the GNU C library but the interface or the semantics of
-the function has been changed in the meantime. For binary compatibility
-with the old library, a newer library needs to still have the old interface
-for old programs. On the other hand, new programs should use the new
-interface. Symbol versioning is the solution for this problem. The GNU
-libc version 2.1 uses symbol versioning by default if the installed binutils
-supports it.
-
-We don't advise building without symbol versioning, since you lose binary
-compatibility - forever! The binary compatibility you lose is not only
-against the previous version of the GNU libc (version 2.0) but also against
-all future versions.
-
-
-1.18. How can I compile on my fast ix86 machine a working libc for my slow
- i386? After installing libc, programs abort with "Illegal
- Instruction".
-
-{AJ} glibc and gcc might generate some instructions on your machine that
-aren't available on i386. You've got to tell glibc that you're configuring
-for i386 with adding i386 as your machine, for example:
-
- ../configure --prefix=/usr i386-pc-linux-gnu
-
-And you need to tell gcc to only generate i386 code, just add `-mcpu=i386'
-(just -m386 doesn't work) to your CFLAGS.
-
-{UD} This applies not only to the i386. Compiling on a i686 for any older
-model will also fail if the above methods are not used.
-
-
-1.19. `make' complains about a missing dlfcn/libdl.so when building
- malloc/libmemprof.so. How can I fix this?
-
-{AJ} Older make version (<= 3.78.90) have a bug which was hidden by a bug in
-glibc (<= 2.1.2). You need to upgrade make to a newer or fixed version.
-
-After upgrading make, you should remove the file sysd-sorted in your build
-directory. The problem is that the broken make creates a wrong order for
-one list in that file. The list has to be recreated with the new make -
-which happens if you remove the file.
-
-You might encounter this bug also in other situations where make scans
-directories. I strongly advise to upgrade your make version to 3.79 or
-newer.
-
-
-1.20. Which tools should I use for MIPS?
-
-{AJ} You should use the current development version of gcc 3.2 or newer from
-CVS.
-
-You need also recent binutils, anything before and including 2.11 will not
-work correctly. Either try the Linux binutils 2.11.90.0.5 from HJ Lu or the
-current development version of binutils from CVS.
-
-Please note that `make check' might fail for a number of the math tests
-because of problems of the FPU emulation in the Linux kernel (the MIPS FPU
-doesn't handle all cases and needs help from the kernel).
-
-
-1.21. Which compiler should I use for powerpc64?
-
-{SM} You want to use at least gcc 3.2 (together with the right versions
-of all the other tools, of course).
-
-
-1.22. `make' fails when running rpcgen the first time,
- what is going on? How do I fix this?
-
-{CO} The first invocation of rpcgen is also the first use of the recently
-compiled dynamic loader. If there is any problem with the dynamic loader
-it will more than likely fail to run rpcgen properly. This could be due to
-any number of problems.
-
-The only real solution is to debug the loader and determine the problem
-yourself. Please remember that for each architecture there may be various
-patches required to get glibc HEAD into a runnable state. The best course
-of action is to determine if you have all the required patches.
-
-
-1.23. Why do I get:
- `#error "glibc cannot be compiled without optimization"',
- when trying to compile GNU libc with GNU CC?
-
-{AJ,CO} There are a couple of reasons why the GNU C library will not work
-correctly if it is not complied with optimzation.
-
-In the early startup of the dynamic loader (_dl_start), before
-relocation of the PLT, you cannot make function calls. You must inline
-the functions you will use during early startup, or call compiler
-builtins (__builtin_*).
-
-Without optimizations enabled GNU CC will not inline functions. The
-early startup of the dynamic loader will make function calls via an
-unrelocated PLT and crash.
-
-Without auditing the dynamic linker code it would be difficult to remove
-this requirement.
-
-Another reason is that nested functions must be inlined in many cases to
-avoid executable stacks.
-
-In practice there is no reason to compile without optimizations, therefore
-we require that GNU libc be compiled with optimizations enabled.
-
-
-. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
-2. Installation and configuration issues
-
-2.1. Can I replace the libc on my Linux system with GNU libc?
-
-{UD} You cannot replace any existing libc for Linux with GNU libc. It is
-binary incompatible and therefore has a different major version. You can,
-however, install it alongside your existing libc.
-
-For Linux there are three major libc versions:
- libc-4 a.out libc
- libc-5 original ELF libc
- libc-6 GNU libc
-
-You can have any combination of these three installed. For more information
-consult documentation for shared library handling. The Makefiles of GNU
-libc will automatically generate the needed symbolic links which the linker
-will use.
-
-
-2.2. How do I configure GNU libc so that the essential libraries
- like libc.so go into /lib and the other into /usr/lib?
-
-{UD,AJ} Like all other GNU packages GNU libc is designed to use a base
-directory and install all files relative to this. The default is
-/usr/local, because this is safe (it will not damage the system if installed
-there). If you wish to install GNU libc as the primary C library on your
-system, set the base directory to /usr (i.e. run configure --prefix=/usr
-<other_options>). Note that this can damage your system; see question 2.3 for
-details.
-
-Some systems like Linux have a filesystem standard which makes a difference
-between essential libraries and others. Essential libraries are placed in
-/lib because this directory is required to be located on the same disk
-partition as /. The /usr subtree might be found on another
-partition/disk. If you configure for Linux with --prefix=/usr, then this
-will be done automatically.
-
-To install the essential libraries which come with GNU libc in /lib on
-systems other than Linux one must explicitly request it. Autoconf has no
-option for this so you have to use a `configparms' file (see the `INSTALL'
-file for details). It should contain:
-
-slibdir=/lib
-sysconfdir=/etc
-
-The first line specifies the directory for the essential libraries, the
-second line the directory for system configuration files.
-
-
-2.3. How should I avoid damaging my system when I install GNU libc?
-
-{ZW} If you wish to be cautious, do not configure with --prefix=/usr. If
-you don't specify a prefix, glibc will be installed in /usr/local, where it
-will probably not break anything. (If you wish to be certain, set the
-prefix to something like /usr/local/glibc2 which is not used for anything.)
-
-The dangers when installing glibc in /usr are twofold:
-
-* glibc will overwrite the headers in /usr/include. Other C libraries
- install a different but overlapping set of headers there, so the effect
- will probably be that you can't compile anything. You need to rename
- /usr/include out of the way before running `make install'. (Do not throw
- it away; you will then lose the ability to compile programs against your
- old libc.)
-
-* None of your old libraries, static or shared, can be used with a
- different C library major version. For shared libraries this is not a
- problem, because the filenames are different and the dynamic linker
- will enforce the restriction. But static libraries have no version
- information. You have to evacuate all the static libraries in
- /usr/lib to a safe location.
-
-The situation is rather similar to the move from a.out to ELF which
-long-time Linux users will remember.
-
-
-2.4. Do I need to use GNU CC to compile programs that will use the
- GNU C Library?
-
-{ZW} In theory, no; the linker does not care, and the headers are supposed
-to check for GNU CC before using its extensions to the C language.
-
-However, there are currently no ports of glibc to systems where another
-compiler is the default, so no one has tested the headers extensively
-against another compiler. You may therefore encounter difficulties. If you
-do, please report them as bugs.
-
-Also, in several places GNU extensions provide large benefits in code
-quality. For example, the library has hand-optimized, inline assembly
-versions of some string functions. These can only be used with GCC. See
-question 3.8 for details.
-
-
-2.5. When linking with the new libc I get unresolved symbols
- `crypt' and `setkey'. Why aren't these functions in the
- libc anymore?
-
-{} Removed. Does not apply anymore.
-
-
-2.6. When I use GNU libc on my Linux system by linking against
- the libc.so which comes with glibc all I get is a core dump.
-
-{UD} On Linux, gcc sets the dynamic linker to /lib/ld-linux.so.1 unless the
-user specifies a --dynamic-linker argument. This is the name of the libc5
-dynamic linker, which does not work with glibc.
-
-For casual use of GNU libc you can just specify to the linker
- --dynamic-linker=/lib/ld-linux.so.2
-
-which is the glibc dynamic linker, on Linux systems. On other systems the
-name is /lib/ld.so.1. When linking via gcc, you've got to add
- -Wl,--dynamic-linker=/lib/ld-linux.so.2
-
-to the gcc command line.
-
-To change your environment to use GNU libc for compiling you need to change
-the `specs' file of your gcc. This file is normally found at
-
- /usr/lib/gcc-lib/<arch>/<version>/specs
-
-In this file you have to change a few things:
-
-- change `ld-linux.so.1' to `ld-linux.so.2'
-
-- remove all expression `%{...:-lgmon}'; there is no libgmon in glibc
-
-- fix a minor bug by changing %{pipe:-} to %|
-
-Here is what the gcc-2.7.2 specs file should look like when GNU libc is
-installed at /usr:
-
------------------------------------------------------------------------
-*asm:
-%{V} %{v:%{!V:-V}} %{Qy:} %{!Qn:-Qy} %{n} %{T} %{Ym,*} %{Yd,*} %{Wa,*:%*}
-
-*asm_final:
-%|
-
-*cpp:
-%{fPIC:-D__PIC__ -D__pic__} %{fpic:-D__PIC__ -D__pic__} %{!m386:-D__i486__} %{posix:-D_POSIX_SOURCE} %{pthread:-D_REENTRANT}
-
-*cc1:
-%{profile:-p}
-
-*cc1plus:
-
-
-*endfile:
-%{!shared:crtend.o%s} %{shared:crtendS.o%s} crtn.o%s
-
-*link:
--m elf_i386 %{shared:-shared} %{!shared: %{!ibcs: %{!static: %{rdynamic:-export-dynamic} %{!dynamic-linker:-dynamic-linker /lib/ld-linux.so.2}} %{static:-static}}}
-
-*lib:
-%{!shared: %{pthread:-lpthread} %{profile:-lc_p} %{!profile: -lc}}
-
-*libgcc:
--lgcc
-
-*startfile:
-%{!shared: %{pg:gcrt1.o%s} %{!pg:%{p:gcrt1.o%s} %{!p:%{profile:gcrt1.o%s} %{!profile:crt1.o%s}}}} crti.o%s %{!shared:crtbegin.o%s} %{shared:crtbeginS.o%s}
-
-*switches_need_spaces:
-
-
-*signed_char:
-%{funsigned-char:-D__CHAR_UNSIGNED__}
-
-*predefines:
--D__ELF__ -Dunix -Di386 -Dlinux -Asystem(unix) -Asystem(posix) -Acpu(i386) -Amachine(i386)
-
-*cross_compile:
-0
-
-*multilib:
-. ;
-
------------------------------------------------------------------------
-
-Things get a bit more complicated if you have GNU libc installed in some
-other place than /usr, i.e., if you do not want to use it instead of the old
-libc. In this case the needed startup files and libraries are not found in
-the regular places. So the specs file must tell the compiler and linker
-exactly what to use.
-
-Version 2.7.2.3 does and future versions of GCC will automatically
-provide the correct specs.
-
-
-2.7. Looking through the shared libc file I haven't found the
- functions `stat', `lstat', `fstat', and `mknod' and while
- linking on my Linux system I get error messages. How is
- this supposed to work?
-
-{RM} Believe it or not, stat and lstat (and fstat, and mknod) are supposed
-to be undefined references in libc.so.6! Your problem is probably a missing
-or incorrect /usr/lib/libc.so file; note that this is a small text file now,
-not a symlink to libc.so.6. It should look something like this:
-
-GROUP ( libc.so.6 libc_nonshared.a )
-
-
-2.8. When I run an executable on one system which I compiled on
- another, I get dynamic linker errors. Both systems have the same
- version of glibc installed. What's wrong?
-
-{ZW} Glibc on one of these systems was compiled with gcc 2.7 or 2.8, the
-other with egcs (any version). Egcs has functions in its internal
-`libgcc.a' to support exception handling with C++. They are linked into
-any program or dynamic library compiled with egcs, whether it needs them or
-not. Dynamic libraries then turn around and export those functions again
-unless special steps are taken to prevent them.
-
-When you link your program, it resolves its references to the exception
-functions to the ones exported accidentally by libc.so. That works fine as
-long as libc has those functions. On the other system, libc doesn't have
-those functions because it was compiled by gcc 2.8, and you get undefined
-symbol errors. The symbols in question are named things like
-`__register_frame_info'.
-
-For glibc 2.0, the workaround is to not compile libc with egcs. We've also
-incorporated a patch which should prevent the EH functions sneaking into
-libc. It doesn't matter what compiler you use to compile your program.
-
-For glibc 2.1, we've chosen to do it the other way around: libc.so
-explicitly provides the EH functions. This is to prevent other shared
-libraries from doing it.
-
-{UD} Starting with glibc 2.1.1 you can compile glibc with gcc 2.8.1 or
-newer since we have explicitly add references to the functions causing the
-problem. But you nevertheless should use EGCS for other reasons
-(see question 1.2).
-
-{GK} On some Linux distributions for PowerPC, you can see this when you have
-built gcc or egcs from the Web sources (gcc versions 2.95 or earlier), then
-re-built glibc. This happens because in these versions of gcc, exception
-handling is implemented using an older method; the people making the
-distributions are a little ahead of their time.
-
-A quick solution to this is to find the libgcc.a file that came with the
-distribution (it would have been installed under /usr/lib/gcc-lib), do
-`ar x libgcc.a frame.o' to get the frame.o file out, and add a line saying
-`LDLIBS-c.so += frame.o' to the file `configparms' in the directory you're
-building in. You can check you've got the right `frame.o' file by running
-`nm frame.o' and checking that it has the symbols defined that you're
-missing.
-
-This will let you build glibc with the C compiler. The C++ compiler
-will still be binary incompatible with any C++ shared libraries that
-you got with your distribution.
-
-
-2.9. How can I compile gcc 2.7.2.1 from the gcc source code using
- glibc 2.x?
-
-{AJ} There's only correct support for glibc 2.0.x in gcc 2.7.2.3 or later.
-But you should get at least gcc 2.95.3 (or later versions) anyway
-
-
-2.10. The `gencat' utility cannot process the catalog sources which
- were used on my Linux libc5 based system. Why?
-
-{UD} The `gencat' utility provided with glibc complies to the XPG standard.
-The older Linux version did not obey the standard, so they are not
-compatible.
-
-To ease the transition from the Linux version some of the non-standard
-features are also present in the `gencat' program of GNU libc. This mainly
-includes the use of symbols for the message number and the automatic
-generation of header files which contain the needed #defines to map the
-symbols to integers.
-
-Here is a simple SED script to convert at least some Linux specific catalog
-files to the XPG4 form:
-
------------------------------------------------------------------------
-# Change catalog source in Linux specific format to standard XPG format.
-# Ulrich Drepper <drepper@xxxxxxxxxx>, 1996.
-#
-/^\$ #/ {
- h
- s/\$ #\([^ ]*\).*/\1/
- x
- s/\$ #[^ ]* *\(.*\)/\$ \1/
-}
-
-/^# / {
- s/^# \(.*\)/\1/
- G
- s/\(.*\)\n\(.*\)/\2 \1/
-}
------------------------------------------------------------------------
-
-
-2.11. Programs using libc have their messages translated, but other
- behavior is not localized (e.g. collating order); why?
-
-{ZW} Translated messages are automatically installed, but the locale
-database that controls other behaviors is not. You need to run localedef to
-install this database, after you have run `make install'. For example, to
-set up the French Canadian locale, simply issue the command
-
- localedef -i fr_CA -f ISO-8859-1 fr_CA
-
-Please see localedata/README in the source tree for further details.
-
-
-2.12. I have set up /etc/nis.conf, and the Linux libc 5 with NYS
- works great. But the glibc NIS+ doesn't seem to work.
-
-{TK} The glibc NIS+ implementation uses a /var/nis/NIS_COLD_START file for
-storing information about the NIS+ server and their public keys, because the
-nis.conf file does not contain all the necessary information. You have to
-copy a NIS_COLD_START file from a Solaris client (the NIS_COLD_START file is
-byte order independent) or generate it with nisinit from the nis-tools
-package; available at
-
- http://www.suse.de/~kukuk/linux/nisplus.html
-
-
-2.13. I have killed ypbind to stop using NIS, but glibc
- continues using NIS.
-
-{TK} For faster NIS lookups, glibc uses the /var/yp/binding/ files from
-ypbind. ypbind 3.3 and older versions don't always remove these files, so
-glibc will continue to use them. Other BSD versions seem to work correctly.
-Until ypbind 3.4 is released, you can find a patch at
-
- <ftp://ftp.kernel.org/pub/linux/utils/net/NIS/ypbind-3.3-glibc4.diff.gz>
-
-
-2.14. Under Linux/Alpha, I always get "do_ypcall: clnt_call:
- RPC: Unable to receive; errno = Connection refused" when using NIS.
-
-{TK} You need a ypbind version which is 64bit clean. Some versions are not
-64bit clean. A 64bit clean implementation is ypbind-mt. For ypbind 3.3,
-you need the patch from ftp.kernel.org (See the previous question). I don't
-know about other versions.
-
-
-2.15. After installing glibc name resolving doesn't work properly.
-
-{AJ} You probably should read the manual section describing nsswitch.conf
-(just type `info libc "NSS Configuration File"'). The NSS configuration
-file is usually the culprit.
-
-
-2.16. How do I create the databases for NSS?
-
-{AJ} If you have an entry "db" in /etc/nsswitch.conf you should also create
-the database files. The glibc sources contain a Makefile which does the
-necessary conversion and calls to create those files. The file is
-`db-Makefile' in the subdirectory `nss' and you can call it with `make -f
-db-Makefile'. Please note that not all services are capable of using a
-database. Currently passwd, group, ethers, protocol, rpc, services shadow
-and netgroup are implemented. See also question 2.31.
-
-
-2.17. I have /usr/include/net and /usr/include/scsi as symlinks
- into my Linux source tree. Is that wrong?
-
-{PB} This was necessary for libc5, but is not correct when using glibc.
-Including the kernel header files directly in user programs usually does not
-work (see question 3.5). glibc provides its own <net/*> and <scsi/*> header
-files to replace them, and you may have to remove any symlink that you have
-in place before you install glibc. However, /usr/include/asm and
-/usr/include/linux should remain as they were.
-
-
-2.18. Programs like `logname', `top', `uptime' `users', `w' and
- `who', show incorrect information about the (number of)
- users on my system. Why?
-
-{MK} See question 3.2.
-
-
-2.19. After upgrading to glibc 2.1 with symbol versioning I get
- errors about undefined symbols. What went wrong?
-
-{AJ} The problem is caused either by wrong program code or tools. In the
-versioned libc a lot of symbols are now local that were global symbols in
-previous versions. It seems that programs linked against older versions
-often accidentally used libc global variables -- something that should not
-happen.
-
-The only way to fix this is to recompile your program. Sorry, that's the
-price you might have to pay once for quite a number of advantages with
-symbol versioning.
-
-
-2.20. When I start the program XXX after upgrading the library
- I get
- XXX: Symbol `_sys_errlist' has different size in shared
- object, consider re-linking
- Why? What should I do?
-
-{UD} As the message says, relink the binary. The problem is that a few
-symbols from the library can change in size and there is no way to avoid
-this. _sys_errlist is a good example. Occasionally there are new error
-numbers added to the kernel and this must be reflected at user level,
-breaking programs that refer to them directly.
-
-Such symbols should normally not be used at all. There are mechanisms to
-avoid using them. In the case of _sys_errlist, there is the strerror()
-function which should _always_ be used instead. So the correct fix is to
-rewrite that part of the application.
-
-In some situations (especially when testing a new library release) it might
-be possible that a symbol changed size when that should not have happened.
-So in case of doubt report such a warning message as a problem.
-
-
-2.21. What do I need for C++ development?
-
-{HJ,AJ} You need either egcs 1.1 which comes directly with libstdc++ or
-gcc-2.8.1 together with libstdc++ 2.8.1.1. egcs 1.1 has the better C++
-support and works directly with glibc 2.1. If you use gcc-2.8.1 with
-libstdc++ 2.8.1.1, you need to modify libstdc++ a bit. A patch is available
-as:
- <ftp://alpha.gnu.org/gnu/libstdc++-2.8.1.1-glibc2.1-diff.gz>
-
-Please note that libg++ 2.7.2 (and the Linux Versions 2.7.2.x) doesn't work
-very well with the GNU C library due to vtable thunks. If you're upgrading
-from glibc 2.0.x to 2.1 you have to recompile libstdc++ since the library
-compiled for 2.0 is not compatible due to the new Large File Support (LFS)
-in version 2.1.
-
-{UD} But since in the case of a shared libstdc++ the version numbers should
-be different existing programs will continue to work.
-
-
-2.22. Even statically linked programs need some shared libraries
- which is not acceptable for me. What can I do?
-
-{AJ} NSS (for details just type `info libc "Name Service Switch"') won't
-work properly without shared libraries. NSS allows using different services
-(e.g. NIS, files, db, hesiod) by just changing one configuration file
-(/etc/nsswitch.conf) without relinking any programs. The only disadvantage
-is that now static libraries need to access shared libraries. This is
-handled transparently by the GNU C library.
-
-A solution is to configure glibc with --enable-static-nss. In this case you
-can create a static binary that will use only the services dns and files
-(change /etc/nsswitch.conf for this). You need to link explicitly against
-all these services. For example:
-
- gcc -static test-netdb.c -o test-netdb \
- -Wl,--start-group -lc -lnss_files -lnss_dns -lresolv -Wl,--end-group
-
-The problem with this approach is that you've got to link every static
-program that uses NSS routines with all those libraries.
-
-{UD} In fact, one cannot say anymore that a libc compiled with this
-option is using NSS. There is no switch anymore. Therefore it is
-*highly* recommended *not* to use --enable-static-nss since this makes
-the behaviour of the programs on the system inconsistent.
-
-
-2.23. I just upgraded my Linux system to glibc and now I get
- errors whenever I try to link any program.
-
-{ZW} This happens when you have installed glibc as the primary C library but
-have stray symbolic links pointing at your old C library. If the first
-`libc.so' the linker finds is libc 5, it will use that. Your program
-expects to be linked with glibc, so the link fails.
-
-The most common case is that glibc put its `libc.so' in /usr/lib, but there
-was a `libc.so' from libc 5 in /lib, which gets searched first. To fix the
-problem, just delete /lib/libc.so. You may also need to delete other
-symbolic links in /lib, such as /lib/libm.so if it points to libm.so.5.
-
-{AJ} The perl script test-installation.pl which is run as last step during
-an installation of glibc that is configured with --prefix=/usr should help
-detect these situations. If the script reports problems, something is
-really screwed up.
-
-
-2.24. When I use nscd the machine freezes.
-
-{UD} You cannot use nscd with Linux 2.0.*. There is functionality missing
-in the kernel and work-arounds are not suitable. Besides, some parts of the
-kernel are too buggy when it comes to using threads.
-
-If you need nscd, you have to use at least a 2.1 kernel.
-
-Note that I have at this point no information about any other platform.
-
-
-2.25. I need lots of open files. What do I have to do?
-
-{AJ} This is at first a kernel issue. The kernel defines limits with
-OPEN_MAX the number of simultaneous open files and with FD_SETSIZE the
-number of used file descriptors. You need to change these values in your
-kernel and recompile the kernel so that the kernel allows more open
-files. You don't necessarily need to recompile the GNU C library since the
-only place where OPEN_MAX and FD_SETSIZE is really needed in the library
-itself is the size of fd_set which is used by select.
-
-The GNU C library is now select free. This means it internally has no
-limits imposed by the `fd_set' type. Instead all places where the
-functionality is needed the `poll' function is used.
-
-If you increase the number of file descriptors in the kernel you don't need
-to recompile the C library.
-
-{UD} You can always get the maximum number of file descriptors a process is
-allowed to have open at any time using
-
- number = sysconf (_SC_OPEN_MAX);
-
-This will work even if the kernel limits change.
-
-
-2.26. How do I get the same behavior on parsing /etc/passwd and
- /etc/group as I have with libc5 ?
-
-{TK} The name switch setup in /etc/nsswitch.conf selected by most Linux
-distributions does not support +/- and netgroup entries in the files like
-/etc/passwd. Though this is the preferred setup some people might have
-setups coming over from the libc5 days where it was the default to recognize
-lines like this. To get back to the old behaviour one simply has to change
-the rules for passwd, group, and shadow in the nsswitch.conf file as
-follows:
-
-passwd: compat
-group: compat
-shadow: compat
-
-passwd_compat: nis
-group_compat: nis
-shadow_compat: nis
-
-
-2.27. What needs to be recompiled when upgrading from glibc 2.0 to glibc
- 2.1?
-
-{AJ,CG} If you just upgrade the glibc from 2.0.x (x <= 7) to 2.1, binaries
-that have been linked against glibc 2.0 will continue to work.
-
-If you compile your own binaries against glibc 2.1, you also need to
-recompile some other libraries. The problem is that libio had to be changed
-and therefore libraries that are based or depend on the libio of glibc,
-e.g. ncurses, slang and most C++ libraries, need to be recompiled. If you
-experience strange segmentation faults in your programs linked against glibc
-2.1, you might need to recompile your libraries.
-
-Another problem is that older binaries that were linked statically against
-glibc 2.0 will reference the older nss modules (libnss_files.so.1 instead of
-libnss_files.so.2), so don't remove them. Also, the old glibc-2.0 compiled
-static libraries (libfoo.a) which happen to depend on the older libio
-behavior will be broken by the glibc 2.1 upgrade. We plan to produce a
-compatibility library that people will be able to link in if they want
-to compile a static library generated against glibc 2.0 into a program
-on a glibc 2.1 system. You just add -lcompat and you should be fine.
-
-The glibc-compat add-on will provide the libcompat.a library, the older
-nss modules, and a few other files. Together, they should make it
-possible to do development with old static libraries on a glibc 2.1
-system. This add-on is still in development. You can get it from
- <ftp://alpha.gnu.org/gnu/glibc/glibc-compat-2.1.tar.gz>
-but please keep in mind that it is experimental.
-
-
-2.28. Why is extracting files via tar so slow?
-
-{AJ} Extracting of tar archives might be quite slow since tar has to look up
-userid and groupids and doesn't cache negative results. If you have nis or
-nisplus in your /etc/nsswitch.conf for the passwd and/or group database,
-each file extractions needs a network connection. There are two possible
-solutions:
-
-- do you really need NIS/NIS+ (some Linux distributions add by default
- nis/nisplus even if it's not needed)? If not, just remove the entries.
-
-- if you need NIS/NIS+, use the Name Service Cache Daemon nscd that comes
- with glibc 2.1.
-
-
-2.29. Compiling programs I get parse errors in libio.h (e.g. "parse error
- before `_IO_seekoff'"). How should I fix this?
-
-{AJ} You might get the following errors when upgrading to glibc 2.1:
-
- In file included from /usr/include/stdio.h:57,
- from ...
- /usr/include/libio.h:335: parse error before `_IO_seekoff'
- /usr/include/libio.h:335: parse error before `_G_off64_t'
- /usr/include/libio.h:336: parse error before `_IO_seekpos'
- /usr/include/libio.h:336: parse error before `_G_fpos64_t'
-
-The problem is a wrong _G_config.h file in your include path. The
-_G_config.h file that comes with glibc 2.1 should be used and not one from
-libc5 or from a compiler directory. To check which _G_config.h file the
-compiler uses, compile your program with `gcc -E ...|grep G_config.h' and
-remove that file. Your compiler should pick up the file that has been
-installed by glibc 2.1 in your include directory.
-
-
-2.30. After upgrading to glibc 2.1, libraries that were compiled against
- glibc 2.0.x don't work anymore.
-
-{AJ} See question 2.27.
-
-
-2.31. What happened to the Berkeley DB libraries? Can I still use db
- in /etc/nsswitch.conf?
-
-{AJ} Due to too many incompatible changes in disk layout and API of Berkeley
-DB and a too tight coupling of libc and libdb, the db library has been
-removed completely from glibc 2.2. The only place that really used the
-Berkeley DB was the NSS db module.
-
-The NSS db module has been rewritten to support a number of different
-versions of Berkeley DB for the NSS db module. Currently the releases 2.x
-and 3.x of Berkeley DB are supported. The older db 1.85 library is not
-supported. You can use the version from glibc 2.1.x or download a version
-from Sleepycat Software (http://www.sleepycat.com). The library has to be
-compiled as shared library and installed in the system lib directory
-(normally /lib). The library needs to have a special soname to be found by
-the NSS module.
-
-If public structures change in a new Berkeley db release, this needs to be
-reflected in glibc.
-
-Currently the code searches for libraries with a soname of "libdb.so.3"
-(that's the name from db 2.4.14 which comes with glibc 2.1.x) and
-"libdb-3.0.so" (the name used by db 3.0.55 as default).
-
-The nss_db module is now in a separate package since it requires a database
-library being available.
-
-
-2.32. What has do be done when upgrading to glibc 2.2?
-
-{AJ} The upgrade to glibc 2.2 should run smoothly, there's in general no
-need to recompile programs or libraries. Nevertheless, some changes might
-be needed after upgrading:
-- The utmp daemon has been removed and is not supported by glibc anymore.
- If it has been in use, it should be switched off.
-- Programs using IPv6 have to be recompiled due to incompatible changes in
- sockaddr_in6 by the IPv6 working group.
-- The Berkeley db libraries have been removed (for details see question 2.31).
-- The format of the locale files has changed, all locales should be
- regenerated with localedef. All statically linked applications which use
- i18n should be recompiled, otherwise they'll not be localized.
-- glibc comes with a number of new applications. For example ldconfig has
- been implemented for glibc, the libc5 version of ldconfig is not needed
- anymore.
-- There's no more K&R compatibility in the glibc headers. The GNU C library
- requires a C compiler that handles especially prototypes correctly.
- Especially gcc -traditional will not work with glibc headers.
-
-Please read also the NEWS file which is the authoritative source for this
-and gives more details for some topics.
-
-
-2.33. The makefiles want to do a CVS commit.
-
-{} Removed. Does not apply anymore.
-
-
-2.34. When compiling C++ programs, I get a compilation error in streambuf.h.
-
-{BH} You are using g++ 2.95.2? After upgrading to glibc 2.2, you need to
-apply a patch to the include files in /usr/include/g++, because the fpos_t
-type has changed in glibc 2.2. The patch is at
-
- http://www.haible.de/bruno/gccinclude-glibc-2.2-compat.diff
-
-
-2.35. When recompiling GCC, I get compilation errors in libio.
-
-{BH} You are trying to recompile gcc 2.95.2? Use gcc 2.95.3 instead.
-This version is needed because the fpos_t type and a few libio internals
-have changed in glibc 2.2, and gcc 2.95.3 contains a corresponding patch.
-
-
-2.36. Why shall glibc never get installed on GNU/Linux systems in
-/usr/local?
-
-{AJ} The GNU C compiler treats /usr/local/include and /usr/local/lib in a
-special way, these directories will be searched before the system
-directories. Since on GNU/Linux the system directories /usr/include and
-/usr/lib contain a --- possibly different --- version of glibc and mixing
-certain files from different glibc installations is not supported and will
-break, you risk breaking your complete system. If you want to test a glibc
-installation, use another directory as argument to --prefix. If you like to
-install this glibc version as default version, overriding the existing one,
-use --prefix=/usr and everything will go in the right places.
-
-
-2.37. When recompiling GCC, I get compilation errors in libstdc++.
-
-{BH} You are trying to recompile gcc 3.2? You need to patch gcc 3.2,
-because some last minute changes were made in glibc 2.3 which were not
-known when gcc 3.2 was released. The patch is at
-
- http://www.haible.de/bruno/gcc-3.2-glibc-2.3-compat.diff
-
-
-. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
-3. Source and binary incompatibilities, and what to do about them
-
-3.1. I expect GNU libc to be 100% source code compatible with
- the old Linux based GNU libc. Why isn't it like this?
-
-{DMT,UD} Not every extension in Linux libc's history was well thought-out.
-In fact it had a lot of problems with standards compliance and with
-cleanliness. With the introduction of a new version number these errors can
-now be corrected. Here is a list of the known source code
-incompatibilities:
-
-* _GNU_SOURCE: glibc does not make the GNU extensions available
- automatically. If a program depends on GNU extensions or some
- other non-standard functionality, it is necessary to compile it
- with the C compiler option -D_GNU_SOURCE, or better, to put
- `#define _GNU_SOURCE' at the beginning of your source files, before
- any C library header files are included. This difference normally
- manifests itself in the form of missing prototypes and/or data type
- definitions. Thus, if you get such errors, the first thing you
- should do is try defining _GNU_SOURCE and see if that makes the
- problem go away.
-
- For more information consult the file `NOTES' in the GNU C library
- sources.
-
-* reboot(): GNU libc sanitizes the interface of reboot() to be more
- compatible with the interface used on other OSes. reboot() as
- implemented in glibc takes just one argument. This argument
- corresponds to the third argument of the Linux reboot system call.
- That is, a call of the form reboot(a, b, c) needs to be changed into
- reboot(c). Beside this the header <sys/reboot.h> defines the needed
- constants for the argument. These RB_* constants should be used
- instead of the cryptic magic numbers.
-
-* swapon(): the interface of this function didn't change, but the
- prototype is in a separate header file <sys/swap.h>. This header
- file also provides the SWAP_* constants defined by <linux/swap.h>;
- you should use them for the second argument to swapon().
-
-* errno: If a program uses the variable "errno", then it _must_
- include <errno.h>. The old libc often (erroneously) declared this
- variable implicitly as a side-effect of including other libc header
- files. glibc is careful to avoid such namespace pollution, which,
- in turn, means that you really need to include the header files that
- you depend on. This difference normally manifests itself in the
- form of the compiler complaining about references to an undeclared
- symbol "errno".
-
-* Linux-specific syscalls: All Linux system calls now have appropriate
- library wrappers and corresponding declarations in various header files.
- This is because the syscall() macro that was traditionally used to
- work around missing syscall wrappers are inherently non-portable and
- error-prone. The following table lists all the new syscall stubs,
- the header-file declaring their interface and the system call name.
-
- syscall name: wrapper name: declaring header file:
- ------------- ------------- ----------------------
- bdflush bdflush <sys/kdaemon.h>
- syslog ksyslog_ctl <sys/klog.h>
-
-* lpd: Older versions of lpd depend on a routine called _validuser().
- The library does not provide this function, but instead provides
- __ivaliduser() which has a slightly different interface. Simply
- upgrading to a newer lpd should fix this problem (e.g., the 4.4BSD
- lpd is known to be working).
-
-* resolver functions/BIND: like on many other systems the functions of
- the resolver library are not included in libc itself. There is a
- separate library libresolv. If you get undefined symbol errors for
- symbols starting with `res_*' simply add -lresolv to your linker
- command line.
-
-* the `signal' function's behavior corresponds to the BSD semantic and
- not the SysV semantic as it was in libc-5. The interface on all GNU
- systems shall be the same and BSD is the semantic of choice. To use
- the SysV behavior simply use `sysv_signal', or define _XOPEN_SOURCE.
- See question 3.7 for details.
-
-
-3.2. Why does getlogin() always return NULL on my Linux box?
-
-{UD} The GNU C library has a format for the UTMP and WTMP file which differs
-from what your system currently has. It was extended to fulfill the needs
-of the next years when IPv6 is introduced. The record size is different and
-some fields have different positions. The files written by functions from
-the one library cannot be read by functions from the other library. Sorry,
-but this is what a major release is for. It's better to have a cut now than
-having no means to support the new techniques later.
-
-
-3.3. Where are the DST_* constants found in <sys/time.h> on many
- systems?
-
-{UD} These constants come from the old BSD days and are not used anymore
-(libc5 does not actually implement the handling although the constants are
-defined).
-
-Instead GNU libc contains zone database support and compatibility code for
-POSIX TZ environment variable handling. For former is very much preferred
-(see question 4.3).
-
-
-3.4. The prototypes for `connect', `accept', `getsockopt',
- `setsockopt', `getsockname', `getpeername', `send',
- `sendto', and `recvfrom' are different in GNU libc from
- any other system I saw. This is a bug, isn't it?
-
-{UD} No, this is no bug. This version of GNU libc already follows the new
-Single Unix specifications (and I think the POSIX.1g draft which adopted the
-solution). The type for a parameter describing a size is now `socklen_t', a
-new type.
-
-
-3.5. On Linux I've got problems with the declarations in Linux
- kernel headers.
-
-{UD,AJ} On Linux, the use of kernel headers is reduced to the minimum. This
-gives Linus the ability to change the headers more freely. Also, user
-programs are now insulated from changes in the size of kernel data
-structures.
-
-For example, the sigset_t type is 32 or 64 bits wide in the kernel. In
-glibc it is 1024 bits wide. This guarantees that when the kernel gets a
-bigger sigset_t (for POSIX.1e realtime support, say) user programs will not
-have to be recompiled. Consult the header files for more information about
-the changes.
-
-Therefore you shouldn't include Linux kernel header files directly if glibc
-has defined a replacement. Otherwise you might get undefined results because
-of type conflicts.
-
-
-3.6. I don't include any kernel headers myself but the compiler
- still complains about redeclarations of types in the kernel
- headers.
-
-{UD} The kernel headers before Linux 2.1.61 and 2.0.32 don't work correctly
-with glibc. Compiling C programs is possible in most cases but C++ programs
-have (due to the change of the name lookups for `struct's) problems. One
-prominent example is `struct fd_set'.
-
-There might be some problems left but 2.1.61/2.0.32 fix most of the known
-ones. See the BUGS file for other known problems.
-
-
-3.7. Why don't signals interrupt system calls anymore?
-
-{ZW} By default GNU libc uses the BSD semantics for signal(), unlike Linux
-libc 5 which used System V semantics. This is partially for compatibility
-with other systems and partially because the BSD semantics tend to make
-programming with signals easier.
-
-There are three differences:
-
-* BSD-style signals that occur in the middle of a system call do not
- affect the system call; System V signals cause the system call to
- fail and set errno to EINTR.
-
-* BSD signal handlers remain installed once triggered. System V signal
- handlers work only once, so one must reinstall them each time.
-
-* A BSD signal is blocked during the execution of its handler. In other
- words, a handler for SIGCHLD (for example) does not need to worry about
- being interrupted by another SIGCHLD. It may, however, be interrupted
- by other signals.
-
-There is general consensus that for `casual' programming with signals, the
-BSD semantics are preferable. You don't need to worry about system calls
-returning EINTR, and you don't need to worry about the race conditions
-associated with one-shot signal handlers.
-
-If you are porting an old program that relies on the old semantics, you can
-quickly fix the problem by changing signal() to sysv_signal() throughout.
-Alternatively, define _XOPEN_SOURCE before including <signal.h>.
-
-For new programs, the sigaction() function allows you to specify precisely
-how you want your signals to behave. All three differences listed above are
-individually switchable on a per-signal basis with this function.
-
-If all you want is for one specific signal to cause system calls to fail and
-return EINTR (for example, to implement a timeout) you can do this with
-siginterrupt().
-
-
-3.8. I've got errors compiling code that uses certain string
- functions. Why?
-
-{AJ} glibc 2.1 has special string functions that are faster than the normal
-library functions. Some of the functions are additionally implemented as
-inline functions and others as macros. This might lead to problems with
-existing codes but it is explicitly allowed by ISO C.
-
-The optimized string functions are only used when compiling with
-optimizations (-O1 or higher). The behavior can be changed with two feature
-macros:
-
-* __NO_STRING_INLINES: Don't do any string optimizations.
-* __USE_STRING_INLINES: Use assembly language inline functions (might
- increase code size dramatically).
-
-Since some of these string functions are now additionally defined as macros,
-code like "char *strncpy();" doesn't work anymore (and is unnecessary, since
-<string.h> has the necessary declarations). Either change your code or
-define __NO_STRING_INLINES.
-
-{UD} Another problem in this area is that gcc still has problems on machines
-with very few registers (e.g., ix86). The inline assembler code can require
-almost all the registers and the register allocator cannot always handle
-this situation.
-
-One can disable the string optimizations selectively. Instead of writing
-
- cp = strcpy (foo, "lkj");
-
-one can write
-
- cp = (strcpy) (foo, "lkj");
-
-This disables the optimization for that specific call.
-
-
-3.9. I get compiler messages "Initializer element not constant" with
- stdin/stdout/stderr. Why?
-
-{RM,AJ} Constructs like:
- static FILE *InPtr = stdin;
-
-lead to this message. This is correct behaviour with glibc since stdin is
-not a constant expression. Please note that a strict reading of ISO C does
-not allow above constructs.
-
-One of the advantages of this is that you can assign to stdin, stdout, and
-stderr just like any other global variable (e.g. `stdout = my_stream;'),
-which can be very useful with custom streams that you can write with libio
-(but beware this is not necessarily portable). The reason to implement it
-this way were versioning problems with the size of the FILE structure.
-
-To fix those programs you've got to initialize the variable at run time.
-This can be done, e.g. in main, like:
-
- static FILE *InPtr;
- int main(void)
- {
- InPtr = stdin;
- }
-
-or by constructors (beware this is gcc specific):
-
- static FILE *InPtr;
- static void inPtr_construct (void) __attribute__((constructor));
- static void inPtr_construct (void) { InPtr = stdin; }
-
-
-3.10. I can't compile with gcc -traditional (or
- -traditional-cpp). Why?
-
-{AJ} glibc2 does break -traditional and -traditonal-cpp - and will continue
-to do so. For example constructs of the form:
-
- enum {foo
- #define foo foo
- }
-
-are useful for debugging purposes (you can use foo with your debugger that's
-why we need the enum) and for compatibility (other systems use defines and
-check with #ifdef).
-
-
-3.11. I get some errors with `gcc -ansi'. Isn't glibc ANSI compatible?
-
-{AJ} The GNU C library is compatible with the ANSI/ISO C standard. If
-you're using `gcc -ansi', the glibc includes which are specified in the
-standard follow the standard. The ANSI/ISO C standard defines what has to be
-in the include files - and also states that nothing else should be in the
-include files (btw. you can still enable additional standards with feature
-flags).
-
-The GNU C library is conforming to ANSI/ISO C - if and only if you're only
-using the headers and library functions defined in the standard.
-
-
-3.12. I can't access some functions anymore. nm shows that they do
- exist but linking fails nevertheless.
-
-{AJ} With the introduction of versioning in glibc 2.1 it is possible to
-export only those identifiers (functions, variables) that are really needed
-by application programs and by other parts of glibc. This way a lot of
-internal interfaces are now hidden. nm will still show those identifiers
-but marking them as internal. ISO C states that identifiers beginning with
-an underscore are internal to the libc. An application program normally
-shouldn't use those internal interfaces (there are exceptions,
-e.g. __ivaliduser). If a program uses these interfaces, it's broken. These
-internal interfaces might change between glibc releases or dropped
-completely.
-
-
-3.13. When using the db-2 library which comes with glibc is used in
- the Perl db modules the testsuite is not passed. This did not
- happen with db-1, gdbm, or ndbm.
-
-{} Removed. Does not apply anymore.
-
-
-3.14. The pow() inline function I get when including <math.h> is broken.
- I get segmentation faults when I run the program.
-
-{UD} Nope, the implementation is correct. The problem is with egcs version
-prior to 1.1. I.e., egcs 1.0 to 1.0.3 are all broken (at least on Intel).
-If you have to use this compiler you must define __NO_MATH_INLINES before
-including <math.h> to prevent the inline functions from being used. egcs 1.1
-fixes the problem. I don't know about gcc 2.8 and 2.8.1.
-
-
-3.15. The sys/sem.h file lacks the definition of `union semun'.
-
-{UD} Nope. This union has to be provided by the user program. Former glibc
-versions defined this but it was an error since it does not make much sense
-when thinking about it. The standards describing the System V IPC functions
-define it this way and therefore programs must be adopted.
-
-
-3.16. Why has <netinet/ip_fw.h> disappeared?
-
-{AJ} The corresponding Linux kernel data structures and constants are
-totally different in Linux 2.0 and Linux 2.2. This situation has to be
-taken care in user programs using the firewall structures and therefore
-those programs (ipfw is AFAIK the only one) should deal with this problem
-themselves.
-
-
-3.17. I get floods of warnings when I use -Wconversion and include
- <string.h> or <math.h>.
-
-{ZW} <string.h> and <math.h> intentionally use prototypes to override
-argument promotion. -Wconversion warns about all these. You can safely
-ignore the warnings.
-
--Wconversion isn't really intended for production use, only for shakedown
-compiles after converting an old program to standard C.
-
-
-3.18. After upgrading to glibc 2.1, I receive errors about
- unresolved symbols, like `_dl_initial_searchlist' and can not
- execute any binaries. What went wrong?
-
-{AJ} This normally happens if your libc and ld (dynamic linker) are from
-different releases of glibc. For example, the dynamic linker
-/lib/ld-linux.so.2 comes from glibc 2.0.x, but the version of libc.so.6 is
-from glibc 2.1.
-
-The path /lib/ld-linux.so.2 is hardcoded in every glibc2 binary but
-libc.so.6 is searched via /etc/ld.so.cache and in some special directories
-like /lib and /usr/lib. If you run configure with another prefix than /usr
-and put this prefix before /lib in /etc/ld.so.conf, your system will break.
-
-So what can you do? Either of the following should work:
-
-* Run `configure' with the same prefix argument you've used for glibc 2.0.x
- so that the same paths are used.
-* Replace /lib/ld-linux.so.2 with a link to the dynamic linker from glibc
- 2.1.
-
-You can even call the dynamic linker by hand if everything fails. You've
-got to set LD_LIBRARY_PATH so that the corresponding libc is found and also
-need to provide an absolute path to your binary:
-
- LD_LIBRARY_PATH=<path-where-libc.so.6-lives> \
- <path-where-corresponding-dynamic-linker-lives>/ld-linux.so.2 \
- <path-to-binary>/binary
-
-For example `LD_LIBRARY_PATH=/libold /libold/ld-linux.so.2 /bin/mv ...'
-might be useful in fixing a broken system (if /libold contains dynamic
-linker and corresponding libc).
-
-With that command line no path is used. To further debug problems with the
-dynamic linker, use the LD_DEBUG environment variable, e.g.
-`LD_DEBUG=help echo' for the help text.
-
-If you just want to test this release, don't put the lib directory in
-/etc/ld.so.conf. You can call programs directly with full paths (as above).
-When compiling new programs against glibc 2.1, you've got to specify the
-correct paths to the compiler (option -I with gcc) and linker (options
---dynamic-linker, -L and --rpath).
-
-
-3.19. bonnie reports that char i/o with glibc 2 is much slower than with
- libc5. What can be done?
-
-{AJ} The GNU C library uses thread safe functions by default and libc5 used
-non thread safe versions. The non thread safe functions have in glibc the
-suffix `_unlocked', for details check <stdio.h>. Using `putc_unlocked' etc.
-instead of `putc' should give nearly the same speed with bonnie (bonnie is a
-benchmark program for measuring disk access).
-
-
-3.20. Programs compiled with glibc 2.1 can't read db files made with glibc
- 2.0. What has changed that programs like rpm break?
-
-{} Removed. Does not apply anymore.
-
-
-3.21. Autoconf's AC_CHECK_FUNC macro reports that a function exists, but
- when I try to use it, it always returns -1 and sets errno to ENOSYS.
-
-{ZW} You are using a 2.0 Linux kernel, and the function you are trying to
-use is only implemented in 2.1/2.2. Libc considers this to be a function
-which exists, because if you upgrade to a 2.2 kernel, it will work. One
-such function is sigaltstack.
-
-Your program should check at runtime whether the function works, and
-implement a fallback. Note that Autoconf cannot detect unimplemented
-functions in other systems' C libraries, so you need to do this anyway.
-
-
-3.22. My program segfaults when I call fclose() on the FILE* returned
- from setmntent(). Is this a glibc bug?
-
-{GK} No. Don't do this. Use endmntent(), that's what it's for.
-
-In general, you should use the correct deallocation routine. For instance,
-if you open a file using fopen(), you should deallocate the FILE * using
-fclose(), not free(), even though the FILE * is also a pointer.
-
-In the case of setmntent(), it may appear to work in most cases, but it
-won't always work. Unfortunately, for compatibility reasons, we can't
-change the return type of setmntent() to something other than FILE *.
-
-
-3.23. I get "undefined reference to `atexit'"
-
-{UD} This means that your installation is somehow broken. The situation is
-the same as for 'stat', 'fstat', etc (see question 2.7). Investigate why the
-linker does not pick up libc_nonshared.a.
-
-If a similar message is issued at runtime this means that the application or
-DSO is not linked against libc. This can cause problems since 'atexit' is
-not exported anymore.
-
-
-. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
-
-4. Miscellaneous
-
-4.1. After I changed configure.in I get `Autoconf version X.Y.
- or higher is required for this script'. What can I do?
-
-{UD} You have to get the specified autoconf version (or a later one)
-from your favorite mirror of ftp.gnu.org.
-
-
-4.2. When I try to compile code which uses IPv6 headers and
- definitions on my Linux 2.x.y system I am in trouble.
- Nothing seems to work.
-
-{UD} The problem is that IPv6 development still has not reached a point
-where the headers are stable. There are still lots of incompatible changes
-made and the libc headers have to follow.
-
-{PB} The 2.1 release of GNU libc aims to comply with the current versions of
-all the relevant standards. The IPv6 support libraries for older Linux
-systems used a different naming convention and so code written to work with
-them may need to be modified. If the standards make incompatible changes in
-the future then the libc may need to change again.
-
-IPv6 will not work with a 2.0.x kernel. When kernel 2.2 is released it
-should contain all the necessary support; until then you should use the
-latest 2.1.x release you can find. As of 98/11/26 the currently recommended
-kernel for IPv6 is 2.1.129.
-
-Also, as of the 2.1 release the IPv6 API provided by GNU libc is not
-100% complete.
-
-
-4.3. When I set the timezone by setting the TZ environment variable
- to EST5EDT things go wrong since glibc computes the wrong time
- from this information.
-
-{UD} The problem is that people still use the braindamaged POSIX method to
-select the timezone using the TZ environment variable with a format EST5EDT
-or whatever. People, if you insist on using TZ instead of the timezone
-database (see below), read the POSIX standard, the implemented behaviour is
-correct! What you see is in fact the result of the decisions made while
-POSIX.1 was created. We've only implemented the handling of TZ this way to
-be POSIX compliant. It is not really meant to be used.
-
-The alternative approach to handle timezones which is implemented is the
-correct one to use: use the timezone database. This avoids all the problems
-the POSIX method has plus it is much easier to use. Simply run the tzselect
-shell script, answer the question and use the name printed in the end by
-making a symlink /etc/localtime pointing to /usr/share/zoneinfo/NAME (NAME
-is the returned value from tzselect). That's all. You never again have to
-worry.
-
-So, please avoid sending bug reports about time related problems if you use
-the POSIX method and you have not verified something is really broken by
-reading the POSIX standards.
-
-
-4.4. What other sources of documentation about glibc are available?
-
-{AJ} The FSF has a page about the GNU C library at
-<http://www.gnu.org/software/libc/>. The problem data base of open and
-solved bugs in GNU libc is available at
-<http://www-gnats.gnu.org:8080/cgi-bin/wwwgnats.pl>. Eric Green has written
-a HowTo for converting from Linux libc5 to glibc2. The HowTo is accessible
-via the FSF page and at <http://www.imaxx.net/~thrytis/glibc>. Frodo
-Looijaard describes a different way installing glibc2 as secondary libc at
-<http://huizen.dds.nl/~frodol/glibc>.
-
-Please note that this is not a complete list.
-
-
-4.5. The timezone string for Sydney/Australia is wrong since even when
- daylight saving time is in effect the timezone string is EST.
-
-{UD} The problem for some timezones is that the local authorities decided
-to use the term "summer time" instead of "daylight saving time". In this
-case the abbreviation character `S' is the same as the standard one. So,
-for Sydney we have
-
- Eastern Standard Time = EST
- Eastern Summer Time = EST
-
-Great! To get this bug fixed convince the authorities to change the laws
-and regulations of the country this effects. glibc behaves correctly.
-
-
-4.6. I've build make 3.77 against glibc 2.1 and now make gets
- segmentation faults.
-
-{} Removed. Does not apply anymore, use make 3.79 or newer.
-
-
-4.7. Why do so many programs using math functions fail on my AlphaStation?
-
-{AO} The functions floor() and floorf() use an instruction that is not
-implemented in some old PALcodes of AlphaStations. This may cause
-`Illegal Instruction' core dumps or endless loops in programs that
-catch these signals. Updating the firmware to a 1999 release has
-fixed the problem on an AlphaStation 200 4/166.
-
-
-4.8. The conversion table for character set XX does not match with
-what I expect.
-
-{UD} I don't doubt for a minute that some of the conversion tables contain
-errors. We tried the best we can and relied on automatic generation of the
-data to prevent human-introduced errors but this still is no guarantee. If
-you think you found a problem please send a bug report describing it and
-give an authoritive reference. The latter is important since otherwise
-the current behaviour is as good as the proposed one.
-
-Before doing this look through the list of known problem first:
-
-- the GBK (simplified Chinese) encoding is based on Unicode tables. This
- is good. These tables, however, differ slightly from the tables used
- by the M$ people. The differences are these [+ Unicode, - M$]:
-
- +0xA1AA 0x2015
- +0xA844 0x2014
- -0xA1AA 0x2014
- -0xA844 0x2015
-
- In addition the Unicode tables contain mappings for the GBK characters
- 0xA8BC, 0xA8BF, 0xA989 to 0xA995, and 0xFE50 to 0xFEA0.
-
-- when mapping from EUC-CN to GBK and vice versa we ignore the fact that
- the coded character at position 0xA1A4 maps to different Unicode
- characters. Since the iconv() implementation can do whatever it wants
- if it cannot directly map a character this is a perfectly good solution
- since the semantics and appearance of the character does not change.
-
-
-4.9. How can I find out which version of glibc I am using in the moment?
-
-{UD} If you want to find out about the version from the command line simply
-run the libc binary. This is probably not possible on all platforms but
-where it is simply locate the libc DSO and start it as an application. On
-Linux like
-
- /lib/libc.so.6
-
-This will produce all the information you need.
-
-What always will work is to use the API glibc provides. Compile and run the
-following little program to get the version information:
-
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-#include <stdio.h>
-#include <gnu/libc-version.h>
-int main (void) { puts (gnu_get_libc_version ()); return 0; }
-~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
-
-This interface can also obviously be used to perform tests at runtime if
-this should be necessary.
-
-
-4.10. Context switching with setcontext() does not work from within
- signal handlers.
-
-{DMT} The Linux implementations (IA-64, S390 so far) of setcontext()
-supports synchronous context switches only. There are several reasons for
-this:
-
-- UNIX provides no other (portable) way of effecting a synchronous
- context switch (also known as co-routine switch). Some versions
- support this via setjmp()/longjmp() but this does not work
- universally.
-
-- As defined by the UNIX '98 standard, the only way setcontext()
- could trigger an asychronous context switch is if this function
- were invoked on the ucontext_t pointer passed as the third argument
- to a signal handler. But according to draft 5, XPG6, XBD 2.4.3,
- setcontext() is not among the set of routines that may be called
- from a signal handler.
-
-- If setcontext() were to be used for asynchronous context switches,
- all kinds of synchronization and re-entrancy issues could arise and
- these problems have already been solved by real multi-threading
- libraries (e.g., POSIX threads or Linux threads).
-
-- Synchronous context switching can be implemented entirely in
- user-level and less state needs to be saved/restored than for an
- asynchronous context switch. It is therefore useful to distinguish
- between the two types of context switches. Indeed, some
- application vendors are known to use setcontext() to implement
- co-routines on top of normal (heavier-weight) pre-emptable threads.
-
-It should be noted that if someone was dead-bent on using setcontext()
-on the third arg of a signal handler, then IA-64 Linux could support
-this via a special version of sigaction() which arranges that all
-signal handlers start executing in a shim function which takes care of
-saving the preserved registers before calling the real signal handler
-and restoring them afterwards. In other words, we could provide a
-compatibility layer which would support setcontext() for asynchronous
-context switches. However, given the arguments above, I don't think
-that makes sense. setcontext() provides a decent co-routine interface
-and we should just discourage any asynchronous use (which just calls
-for trouble at any rate).
-
-
-~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
-
-Answers were given by:
-{UD} Ulrich Drepper, <drepper@xxxxxxxxxx>
-{DMT} David Mosberger-Tang, <davidm@xxxxxxxxxx>
-{RM} Roland McGrath, <roland@xxxxxxx>
-{AJ} Andreas Jaeger, <aj@xxxxxxx>
-{EY} Eric Youngdale, <eric@xxxxxxxxxxxxxxx>
-{PB} Phil Blundell, <Philip.Blundell@xxxxxxxxx>
-{MK} Mark Kettenis, <kettenis@xxxxxxxxxxx>
-{ZW} Zack Weinberg, <zack@xxxxxxxxxxxxxxxxxxxxxx>
-{TK} Thorsten Kukuk, <kukuk@xxxxxxx>
-{GK} Geoffrey Keating, <geoffk@xxxxxxxxxx>
-{HJ} H.J. Lu, <hjl@xxxxxxx>
-{CG} Cristian Gafton, <gafton@xxxxxxxxxx>
-{AO} Alexandre Oliva, <aoliva@xxxxxxxxxx>
-{BH} Bruno Haible, <haible@xxxxxxxxxxxxxx>
-{SM} Steven Munroe, <sjmunroe@xxxxxxxxxx>
-{CO} Carlos O'Donell, <carlos@xxxxxxxxxxxxxxxx>
-
-Local Variables:
- mode:outline
- outline-regexp:"\\?"
- fill-column:76
-End:
Removed: fsf/trunk/libc/FAQ.in
==============================================================================
--- fsf/trunk/libc/FAQ.in (original)
+++ fsf/trunk/libc/FAQ.in (removed)
@@ -1,1701 +1,0 @@
- Frequently Asked Questions about the GNU C Library
-
-This document tries to answer questions a user might have when installing
-and using glibc. Please make sure you read this before sending questions or
-bug reports to the maintainers.
-
-The GNU C library is very complex. The installation process has not been
-completely automated; there are too many variables. You can do substantial
-damage to your system by installing the library incorrectly. Make sure you
-understand what you are undertaking before you begin.
-
-If you have any questions you think should be answered in this document,
-please let me know.
-
- --drepper@xxxxxxxxxx
-
-? Compiling glibc
-
-?? What systems does the GNU C Library run on?
-
-{UD} This is difficult to answer. The file `README' lists the architectures
-GNU libc was known to run on *at some time*. This does not mean that it
-still can be compiled and run on them now.
-
-The systems glibc is known to work on as of this release, and most probably
-in the future, are:
-
- *-*-gnu GNU Hurd
- i[3456]86-*-linux-gnu Linux-2.x on Intel
- m68k-*-linux-gnu Linux-2.x on Motorola 680x0
- alpha*-*-linux-gnu Linux-2.x on DEC Alpha
- powerpc-*-linux-gnu Linux and MkLinux on PowerPC systems
- powerpc64-*-linux-gnu Linux-2.4+ on 64-bit PowerPC systems
- sparc-*-linux-gnu Linux-2.x on SPARC
- sparc64-*-linux-gnu Linux-2.x on UltraSPARC
- arm-*-none ARM standalone systems
- arm-*-linux Linux-2.x on ARM
- arm-*-linuxaout Linux-2.x on ARM using a.out binaries
- mips*-*-linux-gnu Linux-2.x on MIPS
- ia64-*-linux-gnu Linux-2.x on ia64
- s390-*-linux-gnu Linux-2.x on IBM S/390
- s390x-*-linux-gnu Linux-2.x on IBM S/390 64-bit
- cris-*-linux-gnu Linux-2.4+ on CRIS
-
-Ports to other Linux platforms are in development, and may in fact work
-already, but no one has sent us success reports for them. Currently no
-ports to other operating systems are underway, although a few people have
-expressed interest.
-
-If you have a system not listed above (or in the `README' file) and you are
-really interested in porting it, see the GNU C Library web pages to learn
-how to start contributing:
-
- http://www.gnu.org/software/libc/resources.html
-
-??binsize What compiler do I need to build GNU libc?
-
-{UD} You must use GNU CC to compile GNU libc. A lot of extensions of GNU CC
-are used to increase portability and speed.
-
-GNU CC is found, like all other GNU packages, on
-
- ftp://ftp.gnu.org/pub/gnu
-
-and the many mirror sites. ftp.gnu.org is always overloaded, so try to find
-a local mirror first.
-
-You should always try to use the latest official release. Older versions
-may not have all the features GNU libc requires. The current releases of
-gcc (3.2 or newer) should work with the GNU C library (for MIPS see ?mips).
-
-Please note that gcc 2.95 and 2.95.x cannot compile glibc on Alpha due to
-problems in the complex float support.
-
-?? When I try to compile glibc I get only error messages.
- What's wrong?
-
-{UD} You definitely need GNU make to build GNU libc. No other make
-program has the needed functionality.
-
-We recommend version GNU make version 3.79 or newer. Older versions have
-bugs and/or are missing features.
-
-?? Do I need a special linker or assembler?
-
-{ZW} If you want a shared library, you need a linker and assembler that
-understand all the features of ELF, including weak and versioned symbols.
-The static library can be compiled with less featureful tools, but lacks key
-features such as NSS.
-
-For Linux or Hurd, you want binutils 2.13 or higher. These are the only
-versions we've tested and found reliable. Other versions may work but we
-don't recommend them, especially not when C++ is involved.
-
-Other operating systems may come with system tools that have all the
-necessary features, but this is moot because glibc hasn't been ported to
-them.
-
-??powerpc Which compiler should I use for powerpc?
-
-{} Removed. Does not apply anymore.
-
-??arm Which tools should I use for ARM?
-
-{} Removed. Does not apply anymore.
-
-?? Do I need some more things to compile the GNU C Library?
-
-{UD} Yes, there are some more :-).
-
-* GNU gettext. This package contains the tools needed to construct
- `message catalog' files containing translated versions of system
- messages. See ftp://ftp.gnu.org/pub/gnu or better any mirror
- site. (We distribute compiled message catalogs, but they may not be
- updated in patches.)
-
-* Some files are built with special tools. E.g., files ending in .gperf
- need a `gperf' program. The GNU version (now available in a separate
- package, formerly only as part of libg++) is known to work while some
- vendor versions do not.
-
- You should not need these tools unless you change the source files.
-
-* Perl 5 is needed if you wish to test an installation of GNU libc
- as the primary C library.
-
-* When compiling for Linux, the header files of the Linux kernel must
- be available to the compiler as <linux/*.h> and <asm/*.h>.
-
-* lots of disk space (~400MB for i?86-linux; more for RISC platforms).
-
-* plenty of time. Compiling just the shared and static libraries for
- 35mins on a 2xPIII@550Mhz w/ 512MB RAM. On a 2xUltraSPARC-II@360Mhz
- w/ 1GB RAM it takes about 14 minutes. Multiply this by 1.5 or 2.0
- if you build profiling and/or the highly optimized version as well.
- For Hurd systems times are much higher.
-
- You should avoid compiling in a NFS mounted filesystem. This is
- very slow.
-
- James Troup <J.J.Troup@xxxxxxxxxxxxxxx> reports a compile time for
- an earlier (and smaller!) version of glibc of 45h34m for a full build
- (shared, static, and profiled) on Atari Falcon (Motorola 68030 @ 16 Mhz,
- 14 Mb memory) and Jan Barte <yann@xxxxxxxxxxxxxxxxxxxxxx> reports
- 22h48m on Atari TT030 (Motorola 68030 @ 32 Mhz, 34 Mb memory)
-
- A full build of the PowerPC library took 1h on a PowerPC 750@400Mhz w/
- 64MB of RAM, and about 9h on a 601@60Mhz w/ 72Mb.
-
-?? What version of the Linux kernel headers should be used?
-
-{AJ,UD} The headers from the most recent Linux kernel should be used. The
-headers used while compiling the GNU C library and the kernel binary used
-when using the library do not need to match. The GNU C library runs without
-problems on kernels that are older than the kernel headers used. The other
-way round (compiling the GNU C library with old kernel headers and running
-on a recent kernel) does not necessarily work. For example you can't use
-new kernel features if you used old kernel headers to compile the GNU C
-library.
-
-{ZW} Even if you are using a 2.0 kernel on your machine, we recommend you
-compile GNU libc with 2.2 kernel headers. That way you won't have to
-recompile libc if you ever upgrade to kernel 2.2. To tell libc which
-headers to use, give configure the --with-headers switch
-(e.g. --with-headers=/usr/src/linux-2.2.0/include).
-
-Note that you must configure the 2.2 kernel if you do this, otherwise libc
-will be unable to find <linux/version.h>. Just change the current directory
-to the root of the 2.2 tree and do `make include/linux/version.h'.
-
-?? The compiler hangs while building iconvdata modules. What's
- wrong?
-
-{} Removed. Does not apply anymore.
-
-?? When I run `nm -u libc.so' on the produced library I still
- find unresolved symbols. Can this be ok?
-
-{UD} Yes, this is ok. There can be several kinds of unresolved symbols:
-
-* magic symbols automatically generated by the linker. These have names
- like __start_* and __stop_*
-
-* symbols starting with _dl_* come from the dynamic linker
-
-* weak symbols, which need not be resolved at all (fabs for example)
-
-Generally, you should make sure you find a real program which produces
-errors while linking before deciding there is a problem.
-
-??addon What are these `add-ons'?
-
-{UD} To avoid complications with export rules or external source code some
-optional parts of the libc are distributed as separate packages, e.g., the
-linuxthreads package.
-
-To use these packages as part of GNU libc, just unpack the tarfiles in the
-libc source directory and tell the configuration script about them using the
---enable-add-ons option. If you give just --enable-add-ons configure tries
-to find all the add-on packages in your source tree. This may not work. If
-it doesn't, or if you want to select only a subset of the add-ons, give a
-comma-separated list of the add-ons to enable:
-
- configure --enable-add-ons=linuxthreads
-
-for example.
-
-Add-ons can add features (including entirely new shared libraries), override
-files, provide support for additional architectures, and just about anything
-else. The existing makefiles do most of the work; only some few stub rules
-must be written to get everything running.
-
-Most add-ons are tightly coupled to a specific GNU libc version. Please
-check that the add-ons work with the GNU libc. For example the linuxthreads
-add-on has the same numbering scheme as the libc and will in general only
-work with the corresponding libc.
-
-{AJ} With glibc 2.2 the crypt add-on and with glibc 2.1 the localedata
-add-on have been integrated into the normal glibc distribution, crypt and
[... 2764 lines stripped ...]
_______________________________________________
Commits mailing list
Commits@xxxxxxxxxx
http://eglibc.org/cgi-bin/mailman/listinfo/commits